НОВОСТИ

Timing belt with a groove for the packaging machine "Lydia"

Since November launched the new kind of toothed belt. This timing belt is a polyurethane-based tooth type T10. Belt width 32 mm., While the middle is a longitudinal groove - 18 mm., Which allows the roller inside the belt rolling. Strap designed for pulling the packaging film in automatic filling machines the company "Lydia." Low price and good quality of this belt will allow to take its rightful place in the market of components for packaging machines

11.11.2013


Our company started to produce a new type of knives for automatic packaging machines. The peculiarity of the knife that has no teeth, and it has a tapered shape guillotine cutting working edge

The knife has a tapered shape and is used for automatic packaging machines. Is used when packing in a tight pack with the straight edge of the package. Main dimensions: 293h24, 28h20 mm. The thickness of the blade - 2.5 mm., Openings - 2 pcs.

22.10.2013


Continuing the automotive theme, our company launched a new production of rubber products Silent SAF D = 68 d = 30 h = 104 original part number 4177301000

Sometimes such situations arise when quite difficult to find a particular item for the car. Often goes in search of a lot of precious time. Often these searches end with the item can be purchased only in gathering with a knot, but it is not cheap. Also, the Chinese market is full of spare parts, which have attractive pricing policy, but their quality is poor. To solve one of the problems often arise, our company decided to start manufacturing Bushes SAF

23.09.2013


Our company has filled up its product range of industrial knives another punching knife

The knife is used for the production of plastic bags and bags, namely forms of the elements of the package. Has a curved semicircle shape and serrated cutting blade sharpened inside. Material knife - steel 65G.

12.09.2013


Knives to the packaging machine Czech «Masek Viking»

Now our company produces knives for automatic packaging machines «Masek». Knives are made in two sizes: 270h65h2, 0 mm. 280h82h2 and 5 mm. Workmanship is not inferior to the original knives.

23.10.2012


Knife with an anvil for packaging machine «Aucouturier Aucoflow. 001 "on the order KF" AVC "

Began producing knives with an anvil (lining) for packaging machine «Aucouturier Aucoflow. 001. " The knife comes with an anvil made of steel R6M5, hardness of at least 48 ... 56 HRC.

17.08.2012


Knives for the manufacture of napkins and paper industry "Zigzag".

Began producing knives for manufacture of napkins. The knife is made of durable hardened steel 65G.

27.06.2012


Toothed belts for filling and packaging machines "Citron".

Started production of gear belts for filling and packaging machines "Citron". Original marking 255 L 125 based on rubber.

30.05.2012


Sucker for transporting and carrying a sheet of glass, mirrors

Removable rubber pads and clips allow you to reuse a sucker for work. High quality rubber cushions allow securely attach the suction cup to the surface of glass and mirrors. Have high suction power and long life. We provide services to restore the failed cups and produce new ones.

05.03.2012


Repair guide for pneumatic cylinders of various firms

We repair guide for pneumatic different firms: Camozzi (Camozzi), Festo (Festo), SMC, MSC, Pneumax, Rexroth, etc. Pnevmoapparat Recovering quickly, wear sleeves, anthers, replacing axle shaft, replacing the aluminum cover housing and other worn parts.

13.02.2012


Ring MUVP K1-K7

Manufacture of K-1, K-2, K-3, K-4, K-5, K-6, K-7 for coupling elastic rubber sleeve-finger (MUVP) at TU 2500-37600152106-94. Rings are made of oil and petrol resistant rubber. The temperature range from -50 ° C to +130 ° C, designed to connect the coaxial shafts transmit torque from 31.5 Nm to 16,000 Nm between them, or between the shaft and connected to it by the part and reduce dynamic loads .

16.01.2012


Knives for cutting off filling and packaging machines «ULMA»

We produce knives for cutting off filling and packaging machines «ULMA» 294h65h2 5 mm. Made of hardened steel 65G.

05.12.2011


Repair guide for pneumatic cylinders of various firms

We repair guide for pneumatic different firms: Camozzi (Camozzi), Festo (Festo), SMC, MSC, Pneumax, Rexroth, etc. Pnevmoapparat Recovering quickly, wear sleeves, anthers, replacing axle shaft, replacing the aluminum cover housing and other worn parts.

13.02.2012


Sucker for transporting and carrying a sheet of glass, mirrors

Removable rubber pads and clips allow you to reuse a sucker for work. High quality rubber cushions allow securely attach the suction cup to the surface of glass and mirrors. Have high suction power and long life. We provide services to restore the failed cups and produce new ones.

05.03.2012


Car Parts "HOWO"

Many sites work brand cars "HOWO". This career, and construction, and agriculture. The harsh conditions of their operation in quarries, construction sites, fields, etc. require frequent on / off divider gearbox that eventually leads to damage the seal bilateral this site. Commissioned by one of the clients, our engineers designed, manufactured, tested and passed by the client to operate this item. This item is not worth the expensive import, and the quality meets the cuffs on GOST. With the price of manual cuff divider can be found in our price list.

05.10.2010


New product to replace the old!

In the first quarter of 2010 LLC "Viscount 2000" developed, conducted the test and start manufacturing fotovalov d = 20h400 mm fotoobrudovaniya. Tested shafts worked well with customers. Currently our engineers are preparing to release the next size fotoval - d = 37 x 330 mm.


Instead imports

LLC "Viscount 2000" manufactured and delivered LLC "Factory windows" (Nikolaev) spare parts to Turkish lines stekloobrabatyvayuschey CMS Glass. Pinch rollers washing cabinet d = 105 mm made of light rubber, which leaves no residue on the glass. Also, we put the sleeve on the support rollers of the same line, the size of d = 47h57h65 mm.

14.05.2010


LLC "Viscount 2000" (g Dnepopetrovsk) Kosovo issue some spare parts for glass processing lines

Along with the already-produced plates and gaskets to the lines Z.Bavelloni, Zanetti; pinch rollers to the lines Lisec, Shuring, Barberan; began production cuffs, collars similar original F-10 and Master-43, to the line of double-sided processing of glass edges Buzetti. This product has already been tested in the customer operation and has received positive feedback.

12.12.2009